Multiple-Effect Water Stills & Pure Steam Generator
STERIS-AUSTAR is established in 2006, with the full support of STERIS FINN-AQUA® factory in Finland. The factory manufactures Water Stills and Pure Steam Generators under the FINN-AQUA® trade mark using the same technology, features, manufacturing and quality assurance process.
In 1971, FINN-AQUA® introduced the world’s first Multiple-Effect Water Still, and in 1979 FINN-AQUA® introduced the Pure Steam Generator. The original patented Falling film Type evaporator has been proven in over 3000 installations worldwide.
FINN-AQUA® TC-Series Multiple-Effect Water Stills
FINN-AQUA® TC-Series Multiple-Effect Water Stills are designed to fully comply with current Good Manufacturing Practices (cGMP) requirements to produce high quality distilled water that meets or exceeds US, Japan, European and Chinese Pharmacopoeias Water-for-Injection (WFI) specifications for use in the pharmaceutical and biotech industries. The TC-Series water stills are steam-heated and operate on the multiple-effect distillation principle.
1. Main Features
- Patented FINN-AQUA®
- Three-Stage Separation Process
- Control System Siemens S7 with bilingual (Chinese and English) Operator's Panel
- Feed water booster pump with break tank
- Plant Steam Pressure Reducing Valve (PRV)
- Pure Steam Valve
- Patented Continuous gas separation to HTM 2010 guidelines
- Continuous blowdown
- Recorder for distillate conductivity and valve position
- Full Factory Acceptance Test (FAT)
- Operates with deionized or reverse osmosis feed water
2. Construction
- Sanitary Design
- AISI 316L stainless-steel pressure vessels
- AISI 316L stainless-steel piping and AISI 316L/AISI 316 components
- Sanitary Clamp / Flange connections
- Double - tube sheet construction of first column, both condensers and all pre-heaters
- Pressure vessels built according to Chinese Pressure Vessel code
- Diaphragm valves for distillate/reject
- Ball valves for cooling water
- Orbital welded tubing and components
- Insulated with 3 cm mineral wool and covered with AISI 304 stainless steel on columns, pre-heaters and plant steam line
FINN-AQUA® TC-Series Pure Steam Generators
1. Main Features
- Patented FINN-AQUA®
- Three-Stage Separation Process
- Control System Siemens S7 with bilingual (Chinese and English) Operator's Panel
- Fast Response to Pure Steam Demands
- High Pure Steam Pressure Accuracy
- Proportional Capacity Control (PCC) Enables Operation in Full 0-100% Capacity Range
- Patented Continuously Hot Feed Water Circulation
- Energy Efficient Design with Low Plant Steam and Feed Water Consumption
- Ergonomic Utility Layout
- Single, 3-Phase Electrical Connection
- Patented Continuous gas separation to HTM 2010 guidelines
- Full Factory Acceptance Test (FAT)
- Operates with deionized or reverse osmosis feed water
2. Construction Characteristics
- Sanitary Design
. AISI 316L Stainless-Steel Pressure Vessels
. AISI 316L/AISI 316L Stainless-Steel Piping and Components
. Sanitary Clamp / Flange Connections
- Double - tube sheet construction of column
- Pressure vessels built according to Chinese Pressure Vessel code
- Orbital Welded Pipes and Components
- Insulation with 3 cm Mineral Wool and covered with AISI 304 Stainless-Steel on Column, Pre-heater and circulation Tank
|
