|
Rubber Stopper Washer
1. Application
These machines are designed for fully treatment of sealing devices for pharmaceutical products, like rubber and plastic stoppers, droppers, metal rings and similar components.
2. Main Characteristics
Stoppers to be treated are loaded in separate baskets for better final results. Washing process is done by rotating the whole cabinet, which is a combination of basket. With the add of recycling pump and spray nozzles, suspension particles are ensured to be removed during the operation of fluid-bed.
- Siliconizing through recycling pump.
- Sterilization at 121⊥.
- Drying with filtered 130 ⊥ hot air.
- Cooling by sterilized air of 20 ⊥.
- Chamber can be inspected through loading door.
- Automatic opening and closing of baskets.
- Chamber doors fully meet requirements for sterile environments.
- Option: automatic loading.
- Option: unloading door connect with isolator.
- Multiple ways for automatic unloading.
- Equipment has connections for validation tests.
3. Structure Characteristics
- Machine main-body completely made of AISI316L, except the jacket, which is made of AISI 304SS.
- Support frame of AISI 304 SS.
- External panel made of AISI 304 SS.
- All machine components are sanitary type.
- Machine body insulated with ceramic material, and with external surface made
- Chamber inner surface, tubes, baskets and all parts that will have direct contact with rubber stoppers are polished with connecting system for clean room.
- Automatic unloading, three types of containers are available for selection.﹛
4. Control system
The LT and LST series are equipped with complete controlling system, including controller, PLC and printer. The controlling system controls the machine and basic parameters, such as F0, pressures and level control. Its interface enables operator to customize the working process and manual operations. In addition, the system provides complete process documentation, which could assist operators to operate properly.
5. Process
The whole process consists of different working phases, the design provides maximum flexibility. The washing times and continuous of various working stages are the most appropriate cycle for the material to be treated.
- Ｋ Manual loading 每 automatic unloading into wheeled baskets
- Ｌ Manual loading 每 automatic unloading into containers
- Ｍ Manual loading 每 automatic unloading into sterile bags
- Ｎ Manual loading 每 automatic unloading into isolator
- Ｏ Automatic loading 每 automatic unloading into wheeled baskets
- Ｐ Automatic loading 每 automatic unloading into containers
- Ｑ Automatic loading 每 automatic unloading into sterile bags
- Ｒ Automatic loading 每 automatic unloading into isolator
|
|
