ICOS Company of Italy is very famous in the pharmaceutical and stopper processing fields. It is a professional company which is devoted to the production of washing and sterilization machines. It owns a lot of patented technology and many world famous multinational enterprises are customers of ICOS. It has won public praise and established good brand image in the involved fields.

  Technical characteristics of rubber Stopper Washer :

    Distribution of load in separate baskets for a better final results.

    Washing by simultaneous combination of basket rotation and fluid-bed action guaranteed by a recycling pump and spray nozzles. The particles in suspension are skimmed off.

    Siliconizing evenness guaranteed by recycling pump.

    Sterilization at 121°C.

    Drying with filtered hot air.

    Chamber can be completely inspected through loading door.

    Automatic opening and closing of baskets.

    Chamber doors made in accordance with requirements for sterile environments.

    Possibility of automatic application of load.

    Possibility of interfacing unloading door with the isolator.

    Various automatic unloading possibilities.

    Machine equipped with connections for validation tests.

  Technical characteristics of dry heat sterilizers :

    Air coming into the process chamber, recirculated air in the process chamber and the exhaust air from the process chamber are all filtered through HEPA filters with a filtration efficiency up to 99.99%;

   The pressure in the process chamber is automatically controlled;

   The temperature in the process chamber is automatically controlled;

   The inner wall of the process chamber is of microcellular structure and air is uniformly distributed. It is especially suitable for loading of various products;

   Pneumatic door lock unit is automatically controlled;

   The process chamber is complete with a double-layer sealing strip and special siliconized sealing gaskets are used to create vacuum. Therefore, good sealing of the chamber door can be guaranteed during each cycle. This design can prevent all possible pollutions;

   The process chamber has a double-layer bottom which can improve the distribution of temperature;

   The design of mechanical structure can bear a temperature up to 300 ℃;

   The loading side at the front of the machine is equipped with a connection unit for validation tests;

   The machine can be connected to an isolator;